- Part Number
- Design Load
- 2,650 lb. (1,202 kg)
- Unit Weight
- 10.5 lb. (4.76 kg)
- Typical Overhaul
- 5 years/1,000 hours
- Release Capacity
- 9,000 lb. (4,082 kg)
- Ultimate Load
- 9,938 lb. (4,507 kg)
Cargo Hook Kit with TALON LC Hydraulic Hook, Fixed Provisions & Onboard Weighing System
Product Number: 200-413-00
Call to confirm availability
Onboard's fixed beam cargo hook kits offer many important improvements and benefits over a trolley system design. Factory-installed by Bell on new 407 aircraft, our cargo hook kit eliminates the side-to-side impact of the original trolley system and offers the extra load security of our TALON LC Hydraulic cargo hook. It interfaces with the standard fixed provisions kit from Onboard Systems and mounts to the existing cargo hook hard points on the belly of the aircraft.View Manuals, Certifications, and Hardware Notes
- Simplified Design:The fixed beam design greatly reduces the total part count, which reduces maintenance costs and service requirements.
- Weight Reduction:Elimination of the trolley system allows for a 35% reduction in weight.
- Improved Ground Clearance:Offers additional clearance from the lowest hanging point of the cargo hook, which is important for operations in remote field locations where prepared landing pads are few and far between.
- Right or Left Hand Pilot in Command:Our hydraulic kit can be installed for either right or left hand pilot in command.
- Airframe & Hook Protection:Built-in travel limits keep the hook from striking the airframe and relieve strain on the hook control cables.
- Sleek, Low-Profile System Add-on:Our pin load cell weighing system mounts to one side of the hook by replacing the connecting bolt, rather than attaching as a separate link above the hook. Increases ground clearance by eliminating extra linkage, while still allowing the pilot to know the exact weight of the load.
- TALON® LC Hydraulic Hook:Our hydraulic hook greatly increases load security by using a hydraulically activated release mechanism instead of a traditional manual release cable.
- The Onboard Advantage:Our cargo hook kits can be installed on new or existing aircraft using standard hand tools. Time between overhauls is five years or 1,000 operating hours. And because Onboard Systems maintains a large inventory of cargo hook kits and spare parts, we can usually ship your order out quickly.